Fillis Robot Vacuum Charging: Is It Draining Your Wallet?

Robotics offer convenience and improved living standards, but what about the cost of keeping them running? Fillis Robot Vacuum charging consumption directly impacts household energy bills, a concern that’s increasingly relevant in today’s climate. Analyzing the power consumption of devices like the Fillis robot vacuum requires a close look at the manufacturer’s specifications to understand its operational requirements. For a smart home setup, it’s wise to ensure the energy consumption is sustainable while providing a clean home.

Image taken from the YouTube channel Chris Majestic , from the video titled Watch This Before You Buy A Robot Vacuum! .

Fillis Robot Vacuum Charging Consumption: Is It Draining Your Wallet?

This article explores the electricity consumption of Fillis robot vacuums during charging and operation, helping you understand if it’s significantly impacting your electricity bill. We’ll break down the factors that influence energy usage and provide ways to minimize charging costs.

Understanding Fillis Robot Vacuum Power Usage

Fillis robot vacuums, like other appliances, consume electricity. This consumption is measured in watts (W). The cost of running one depends on the wattage, the duration of use, and your electricity rate (usually expressed in cents or dollars per kilowatt-hour – kWh).

Components Contributing to Energy Consumption

• Vacuuming: The actual cleaning process uses the most energy, powering the motors for suction and brush rolls. The power draw varies based on the cleaning mode (e.g., normal, boost) and the floor type (e.g., carpet, hardwood).
• Charging: When the battery is low, the vacuum returns to its docking station to recharge. The charger itself consumes power during this process, even when the battery is fully charged (though usually a negligible amount).
• Standby: In standby mode, the robot vacuum uses a minimal amount of power to maintain its Wi-Fi connection and be ready for scheduled cleanings.

Factors Influencing Fillis Robot Vacuum Charging Consumption

The actual electricity consumption of your Fillis robot vacuum varies based on several factors:

• Model Type: Different Fillis models have varying battery capacities and motor power, directly impacting energy consumption. Higher-end models with more powerful motors generally use more energy.
• Battery Capacity: Larger batteries take longer to charge and therefore can potentially use more energy during the charging cycle. However, they also allow for longer cleaning times between charges.
• Cleaning Frequency & Duration: The more often you run your vacuum and the longer it cleans per session, the more frequently it will need charging, thus impacting overall energy consumption.
• Cleaning Mode: Using boost mode or other high-power settings increases suction and therefore energy consumption.
• Charging Habits: Leaving the vacuum on the charging dock continuously, even after it’s fully charged, can contribute to slight energy waste, though many modern models have smart charging features to mitigate this.
• Electricity Rates: Your local electricity rates directly impact how much you pay for the energy your Fillis robot vacuum uses.

Estimating Your Fillis Robot Vacuum Charging Cost

To estimate the cost of running your Fillis robot vacuum, you’ll need to gather a few pieces of information.

1. Find the Vacuum’s Wattage: Check the robot vacuum’s specifications. This can usually be found in the user manual or on a sticker located on the device itself.
2. Determine Charging Time: Note how long it takes your Fillis robot vacuum to fully charge from a depleted battery. This information can also be found in the user manual or through your own observation.
3. Find Your Electricity Rate: Locate your electricity bill and find the rate you pay per kilowatt-hour (kWh). This is crucial for calculating the actual cost.

Calculation:

• Convert Wattage to Kilowatts: Divide the wattage by 1000 to get kilowatts (kW). For example, if your vacuum uses 50 watts, that’s 0.05 kW.
• Calculate Energy Consumption per Charge: Multiply the kilowatt value by the charging time in hours. (kW hours = kWh). So, if the charging time is 3 hours, then 0.05 kW 3 hours = 0.15 kWh.
• Calculate the Cost per Charge: Multiply the energy consumption (kWh) by your electricity rate (cost per kWh). For instance, if your electricity rate is $0.20 per kWh, then 0.15 kWh * $0.20/kWh = $0.03.

This means each full charge cycle costs approximately $0.03. To estimate the monthly cost, multiply this by the number of times you charge the vacuum each month.

Example Calculation:

Let’s say:

• Fillis Robot Vacuum Wattage: 60W
• Charging Time: 4 hours
• Electricity Rate: $0.15/kWh

Calculation:

1. 60W / 1000 = 0.06 kW
2. 0. 06 kW * 4 hours = 0.24 kWh
3. 0. 24 kWh * $0.15/kWh = $0.036 (approximately 3.6 cents per charge)

If you charge the vacuum 20 times a month, the estimated cost would be 20 * $0.036 = $0.72 per month.

Tips to Minimize Fillis Robot Vacuum Charging Consumption

Even small changes can help reduce your robot vacuum’s energy consumption:

• Use Eco-Mode (if available): Eco-mode typically lowers suction power, reducing energy usage during cleaning.
• Scheduled Cleaning: Set up a cleaning schedule to avoid running the vacuum more often than necessary.
• Optimize Cleaning Area: Remove clutter from the floor to allow the vacuum to clean more efficiently and reduce cleaning time.
• Unplug Charger (Optional): While many models have smart charging, unplugging the charger after the vacuum is fully charged can eliminate any potential standby power draw.
• Consider a Smart Plug: Use a smart plug to schedule charging times during off-peak hours when electricity rates may be lower (if applicable in your area).
• Regular Maintenance: Regularly clean the brushes, filters, and dustbin. This ensures the vacuum operates efficiently and doesn’t have to work harder, thus saving energy.

So, hopefully, you have a clearer understanding now of Fillis robot vacuum charging consumption. Keep an eye on your usage and enjoy the clean floors without breaking the bank!